GeneralDLP™ chipPanel size24.4 mm (0.96″) diagonal, 16:10 aspect ratio
Display methodDLP™ chip x 3 (R, G, B), DLP™ projection system
Pixels2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
LensOptional powered zoom/focus lenses
Lamp355 W UHM lamp x 2 (dual lamp system)
Screen size (diagonal)1.78-15.24 m (70-600 inches)*2 (16:10 aspect ratio)
Brightness*sup1/sup10,600 lumens (dual lamp, high mode)
Contrast ratio*sup1/sup10,000:1 (full on/full off, in Dynamic iris mode 3)
Resolution1,920 x 1,200 pixels
Scanning frequencyHDMI/DVI-D/RGBHorizontal: 15 -100 kHz, vertical: 24 – 120 Hz, dot clock: 162 MHz or lower
YPsubB/subPsubR/sub (YCsubB/subCsubR/sub)525i (480i) : fH 15.75 kHz; fV 60 Hz 625i (576i) : fH 15.63 kHz; fV 50 Hz 525p (480p) : fH 31.50 kHz; fV 60 Hz 625p (576p) : fH 31.25 kHz; fV 50 Hz 750 (720)/60p : fH 45.00 kHz; fV 60 Hz 750 (720)/50p : fH 37.50 kHz; fV 50 Hz 1035/60i : fH 33.75 kHz; fV 60 Hz 1125 (1080)/60i : fH 33.75 kHz; fV 60 Hz 1125 (1080)/50i : fH 28.13 kHz; fV 50 Hz 1080/25p : fH 28.13 kHz; fV 25 Hz 1080/24p : fH 27.00 kHz; fV 24 Hz 1080/24sF : fH 27.00 kHz; fV 48 Hz 1080/30p : fH 33.75 kHz; fV 30 Hz 1080/60p : fH 67.50 kHz; fV 60 Hz 1080/50p : fH 56.25 kHz; fV 50 Hz
S-Video/VideoHorizontal: 15.75/15.63 kHz, vertical: 50/60 Hz (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Optical axis shift*sup5,/sup/supVertical±55% (±44% with the ET-D75LE6) from center of screen, powered
Horizontal±20% (±15% with the ET-D75LE6) from center of screen, powered
TerminalsSDI INBNC x 1 SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
HDMI INHDMI 19-pin x 1 Deep Color, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), dot clock: 25 -162 MHz
DVI-D INDVI-D 24-pin x 1 DVI 1.0 compliant, compatible with HDCP, compatible with single link only, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 – 162 MHz
RGB 1 INBNC x 5 (RGB/YPBPR/YCBCR x 1)
RGB 2 IND-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO INBNC x 1 (composite video)
S-VIDEO INMini DIN 4-pin x 1 (S-Video)
SERIAL IND-sub 9-pin (female) x 1 (for external control, RS-232C compliant)
SERIAL OUTD-sub 9-pin (male) x 1 (for link control, RS-232C compliant)
REMOTE 1 INM3 jack x 1 (for wired remote control)
REMOTE 1 OUTM3 jack x 1 (for link control)
REMOTE 2 IND-sub 9-pin (female) x 1 (for external control, contact control)
LANRJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Keystone correction rangeVertical: ±40° (±22° with the ET-D75LE50/D75LE5*4, ±28° with the ET-D75LE6)*5, horizontal: ±15° (±10° with the ET-D75LE6)*5
Power cord length3.0 m (9 ft 10 in)
Power supply220-240 V AC, 5.0 A, 50/60 Hz
Power consumption920 W (980 VA at 240 V) (0.3 W with standby mode set to ECO*6. 8 W with standby mode set to NORMAL. Both with fan stopped.)
Dimensions (W × H × D)530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (with legs at shortest position, optional lens not included)
WeightApproximately 24 kg (52.9 lb) without lens
Operating temperature*sup7/sup0°C-45°C (32°F-113°F)
Operating humidity10%-80% (no condensation)
Supplied accessoriesPower cord with security lock, wireless/wired remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia)x 2, safety wire rope
NOTE*1:Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2:1.78-7.62 m (70-300 inches) with the ET-D75LE50/D75LE5*4.
*3:WUXGA resolution is supported only when the signals are compliant with VESA CV T-RB (Coordinated Video Timing-Reduced Blanking).
*4:The optional lenses ET-D75LE4/D75LE5 were discontinued.
*5:When using only the KEYSTONE correction. When using both the KEYSTONE and ARC corrections of the Geometric Adjustment function: vertical ±5°, horizontal ±5° (vertical ±10° and horizontal ±15° with the ET-D75LE40/D75LE4*4/D75LE8).
*6:With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only cer tain commands can be received for external control using the serial terminal.
*7:The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).